[1]張萬鵬,等.不銹鋼高頻焊管焊縫質量的影響因素[J].焊管,2019,42(9):1-5,11.[doi:10.19291/j.cnki.1001-3938.2019.9.001]
 ZHANG Wanpeng,ZHANG Gaolan,et al.Influencing Factors on Weld Quality of Stainless Steel High Frequency Welded Pipe[J].,2019,42(9):1-5,11.[doi:10.19291/j.cnki.1001-3938.2019.9.001]
點擊復制

不銹鋼高頻焊管焊縫質量的影響因素()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
42
期數:
2019年第9期
頁碼:
1-5,11
欄目:
行業綜述
出版日期:
2019-09-28

文章信息/Info

Title:
Influencing Factors on Weld Quality of Stainless Steel High Frequency Welded Pipe
文章編號:
10.19291/j.cnki.1001-3938.2019.9.001
作者:
張萬鵬1 2張高蘭2張亞剛2楊耀彬1 2符利兵1 2牛愛軍1 2韋 奉1 2
1. 國家石油天然氣管材工程技術研究中心, 陜西 寶雞 721008;
2. 寶雞石油鋼管有限責任公司, 陜西 寶雞 721008
Author(s):
ZHANG Wanpeng1 2 ZHANG Gaolan2 ZHANG Yagang2 YANG Yaobin1 2 FU Libing1 2 NIU Aijun1 2 WEI Feng1 2
1. Chinese National Engineering Technology Research Center for Petroleum and Natural Gas Tubular Goods, Baoji 721008, Shaanxi, China;
2. Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China
關鍵詞:
不銹鋼高頻焊管焊接質量
Keywords:
stainless steel high frequency welded pipe welding quality
分類號:
TG441.7
DOI:
10.19291/j.cnki.1001-3938.2019.9.001
文獻標志碼:
A
摘要:
為了保證不銹鋼高頻焊管的質量,實現對不銹鋼高頻焊管的質量控制,對不銹鋼高頻焊接過程中影響工藝質量的主要因素進行了分析,包括不銹鋼材料的理化性能特點、焊接與成型工藝等。指出,要實現不銹鋼鋼管的高頻焊接,關鍵是要保證焊接區域的無氧化,在此基礎上,優化原材料的夾雜物水平,優化焊接與成型工藝,采用先進的成型工藝與焊接電源,均能有效提升不銹鋼高頻焊管的焊縫質量。
Abstract:
In order to ensure the quality of stainless steel high frequency welded pipe and control the quality of stainless steel high frequency welded pipe, the main factors affecting the quality of stainless steel high frequency welding process were analyzed, including the physical and chemical properties of stainless steel, welding and forming process, etc. It is pointed out that in order to realize high frequency welding of stainless steel pipe; the key point is to ensure that there is no oxidation in the welding area. On this basis, the quality of weld seam of stainless steel high frequency welded pipe can be effectively improved by optimizing the inclusion level of raw materials, optimizing the welding and forming process and adopting advanced forming process and welding power source.

參考文獻/References:

[1] 孫林淼. 焊接新技術在不銹鋼焊管生產中的應用[J]. 鋼管, 1992(4): 24-27.
[2] 張朝生, 張志勤. 高頻電焊鋼管產品品種的發展[J]. 鞍鋼技術, 1993(6): 6-9.
[3] 鄒子和, 傅豐仁. 不銹鋼和高鎳合金長管的生產工藝(上)[J]. 鋼管, 2009, 38(4): 25-31.
[4] 鄒子和, 傅豐仁. 不銹鋼和高鎳合金長管的生產工藝(下)[J]. 鋼管, 2009, 38(5): 39-42.
[5] 龔寶興. 不銹鋼焊管的高頻感應焊接[J]. 上海冶金設計, 1994(4): 56-59.
[6] 張志仁譯, 張建平校. 不銹鋼焊管的制造技術及二次加工性[J]. 太鋼譯文, 2000(1): 22-23.
[7] 董玉棟, 孫榮祿. 12%Cr鐵素體不銹鋼高頻焊接接頭的組織與性能[J]. 金屬熱處理, 2017, 42(8): 44-48
[8] 張心保, 王志斌, 連杰. 低鉻不銹鋼高頻感應焊管試制[J]. 金屬加工(熱加工), 2017(4): 77-81.
[9] 耿開博. 鋁管、不銹鋼管的高頻感應焊接[J]. 焊管, 2009, 32(11): 29-31.
[10] 張則勝, 寧道俊. 高頻感應焊接薄壁不銹鋼管[J]. 焊接技術, 1990(5): 11-14.
[11] 李錦旗. 不銹鋼焊管的焊接工藝[J]. 焊管, 1996, 19(1): 3-9.
[12] 畢宗岳, 嚴培林, 余晗,等. 16Cr奧氏體不銹鋼高頻焊接參數對焊縫組織性能的影響[J]. 焊管, 2016, 39(8): 1-6.
[13] AYUKAWA Naoshi, NAKAMURA Hideyuki, KOYUBA Motofumiofumi, et al. Development of weldable martensitic stainless steel line pipe by HF-ERW process[C]// Stainless Steel World 99 Conference. Netherlands: KCI, 1999: 331-340.
[14] 侯鳳桐. 奧氏體不銹鋼焊管的開發[J]. 焊管, 1991, 14(3): 53-58.
[15] PARK G, KIM B, KANG Y, et al. Characterization of bond line discontinuities in a high-Mn TWIP steel pipe welded by HF-ERW[J]. Materials Characterization, 2016, (118): 14-21.
[16] 陳斌. 國外高頻電阻焊合金鋼管的生產工藝及新技術應用[J]. 特鋼技術, 1996(1): 49-53.
[17] 唐繼明. 淺析高頻直縫焊管用坯料及成型要求[J]. 河北冶金, 2006(4): 62-63.
[18] 賴興濤, 谷中瑩, 吳文輝. 采用適當大擠壓力生產優質中大直徑HFW焊管[J]. 焊管, 2011, 34(2): 45-53.
[19] 畢洪運, 陸明和. ERW直縫焊管焊縫形態與金相檢驗評價[J]. 寶鋼技術, 2006(3): 23-26.
[20] 孫林淼. 焊接新技術在不銹鋼焊管生產中的應用[J]. 焊管, 1991, 14(3): 20-24.
[21] ICHIHARA H, SUMIMOT0 D, KIMURA T, et al. Manufacture of alloy steel tube by high frequency electric resistance welding [J]. Transactions ISIJ, 1986(26): 468-475.
[22] HIDEKI H, FUMINORI W, NOBUO M, et al. Development of laminar plasma shielded HF-ERW process[C]// IPC2012. Calgary, Alberta, Canada: IPC, 2012: 1-8.

相似文獻/References:

[1]王三云.高頻焊管成型技術的發展[J].焊管,2007,30(6):11.[doi:1001-3938(2007)06-0011-04]
 WANG San-yun.Development of Forming Technology for High Frequency Welded Pipe[J].,2007,30(9):11.[doi:1001-3938(2007)06-0011-04]
[2]趙寶純.特種錳鈦合金鋼在高頻焊管機擠壓輥上的應用[J].焊管,2009,32(2):36.[doi:1001-3938(2009)02-0036-02]
 ZHAO Bao-chun.Special Manganesetitanium Alloy Steel Application in High Frequency Welded Pipe Squeeze Roller[J].,2009,32(9):36.[doi:1001-3938(2009)02-0036-02]
[3]耿開博.鋁管、不銹鋼管的高頻感應焊接[J].焊管,2009,32(11):29.[doi:1001-3938(2009)11-0029-03]
 GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(9):29.[doi:1001-3938(2009)11-0029-03]
[4]許貴芝 編譯.不銹鋼與鈦合金的轉接管的焊接[J].焊管,2009,32(11):70.[doi:1001-3938(2009)11-0070-03]
 Edited and Translated by XU Gui-zhi.Welding Between Stainless Steel and Titanium Alloy Different Diameter Transfer Tube[J].,2009,32(9):70.[doi:1001-3938(2009)11-0070-03]
[5]何世權,徐德懷,石玗,等.基于LabVIEW高頻焊管溫度采集系統?[J].焊管,2010,33(5):30.[doi:1001-3938(2010)05-0030-03]
 HE Shi-quan,XU De-huai,SHI Yu,et al.High-frequency Welded Pipe Temperature Acquisition System[J].,2010,33(9):30.[doi:1001-3938(2010)05-0030-03]
[6]于影,殷寶麟,于波.用切削法實現高頻焊管去除內毛刺的關鍵技術研究[J].焊管,2010,33(5):33.[doi:1001-3938(2010)05-0033-03]
 YU Ying,YIN Bao-lin,YU Bo.Investigation on The Elimination of Inner-Wall Burr of Welded Pipe with Cutting[J].,2010,33(9):33.[doi:1001-3938(2010)05-0033-03]
[7]余國民,王長安,楊專釗,等.高頻焊管焊縫超聲波探傷探頭參數的選擇[J].焊管,2010,33(9):50.[doi:1001-3938(2010)09-0050-03]
 YU Guo-min,WANG Chang-an,YANG Zhuan-zhao,et al.Probe Parameters Selection of HFW Pipe Weld Ultrasonic Test[J].,2010,33(9):50.[doi:1001-3938(2010)09-0050-03]
[8]司亮,李殿杰,韓寶云.制造執行系統(MES)在高頻焊管(HFW)生產線上的應用前景[J].焊管,2010,33(7):35.[doi:1001-3938(2010)07-0035-04]
 SI Liang,LI Dian-jie,HAN Bao-yun.Application Prospect of Manufacturing Execution System in HFW Pipe Production Line[J].,2010,33(9):35.[doi:1001-3938(2010)07-0035-04]
[9]劉智勇.FFX成型機的先進性及對我國建設大型HFW機組的幾點看法[J].焊管,2011,34(1):43.[doi:1001-3938(2011)01-0043-05]
 LIU Zhi-yong.Advantages of FFX Forming Equipment and Several Views on Construction Large-scale HFW Unit in China[J].,2011,34(9):43.[doi:1001-3938(2011)01-0043-05]
[10]朱斌燕,于 賓,路廣平,等.高頻焊管焊接擠壓輥的調整[J].焊管,2011,34(10):40.[doi:1001-3938(2011)10-0040-04]
 ZHU Bin-yan,YU Bin,LU Guang-ping,et al.Welding Squeezing Roller Adjustment for HFW Pipe[J].,2011,34(9):40.[doi:1001-3938(2011)10-0040-04]

備注/Memo

備注/Memo:
收稿日期:2019-05-10
基金項目: 國家重點研發計劃項目“高應變海洋管線管研制”(項目編號2018YFC0310300)。
作者簡介:張萬鵬(1976—),男,高級工程師,主要從事焊接技術研究和油氣管新產品開發工作。
更新日期/Last Update: 2019-10-24
2019手机彩票软件排名